PosiTest® HHD High Voltage Holiday Detector

$3,895.00
The hand-held portable PosiTest HHD is a pulse DC high voltage holiday detector featuring a voltage setting range of 500 to 35,000 volts.

PosiTest® LPD Holiday Detector

Price range: $15.00 through $1,245.00
Defelsko Positest LPD Holiday Detector Holiday detection has never been easier with the Defelsko Positest LPD.

Tinker-Rasor Low Voltage Wet Sponge Holiday-Pinhole Detector

Price range: $15.00 through $465.00
Verify a pinhole-free coating (up to 20 mils) using the low voltage wet sponge holiday detector from Tinkor-Rasor.

PosiTector DPM

Price range: $445.00 through $1,220.00
Positector DPM Standard Built-in Probe measures and records ambient conditions including air & surface temp., relative humidity & dew point temperature
Select options This product has multiple variants. The options may be chosen on the product page

PosiTector DPM L

$495.00
This dew point meter attaches to steel structures to measure and record environmental parameters independently for up to 200 days. Ideal for unattended logging of environmental data.

PosiTector DPM L+

$645.00
This dew point meter attaches to steel structures to measure and record environmental parameters independently for up to 600 days. Ideal for unattended logging and remote monitoring of environmental data.

PosiTector RTR Replica Tape Reader

Price range: $425.00 through $1,200.00
This remarkable digital spring micrometer measures and records average peak to valley surface profile height with improved accuracy us Testex Press-O-Film Replica Tape. It also provides inspectors with a digital record of measurements that can be downloaded to your computer.
Select options This product has multiple variants. The options may be chosen on the product page

PosiTector SHD Shore Hardness Durometer

Price range: $565.00 through $1,330.00
The PosiTector SHD Shore Hardnesss Durometer is a handheld electronic instrument that measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges - Shore A and Shore D.
Select options This product has multiple variants. The options may be chosen on the product page

PosiTector SPG Surface Profile Gauge

Price range: $410.00 through $1,535.00
The PosiTector SPG Surface Profile Gauge measures and records peak to valley surface profile heights.
Select options This product has multiple variants. The options may be chosen on the product page

Testex Analog Spring Micrometer

Price range: $240.00 through $335.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.' If Needing ISO Certification please call our sales team at 1-800-582-4243
Select options This product has multiple variants. The options may be chosen on the product page

Tinker & Rasor APW

$4,200.00
Detect pinholes in coating and linings greater than 20 mils thick. Variable voltage up to 35,000 volts. Select from various electrodes. Comes with a wand, ground wire, and battery charger.

DeFelsko PosiTector 6000 and Probes

Price range: $325.00 through $1,865.00
Positector 6000 and Probes. Choose either the Standard Memory Body or the Advanced Memory Body and then add your probes!

PosiTector BHI

Price range: $920.00 through $1,695.00
Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials like harder plastics and fiber-reinforced plastic
Select options This product has multiple variants. The options may be chosen on the product page

PosiTector Ultrasonic Wall Thickness Gauge

Price range: $805.00 through $2,365.00
Measure the wall thickness of pipe and other steel structures from one side using the DeFelsko UTG ultrasonic wall thickness gauge.
Select options This product has multiple variants. The options may be chosen on the product page

PosiTest DFT Coating Thickness Gage

Price range: $495.00 through $695.00
The PosiTest DFT nondestructively measures the total thickness of coatings applied to ferrous (F model) or ferrous/Non-ferrous (F/NF model) metal substrates.

PTC Surface Temperature Thermometer

Price range: $65.00 through $163.00
KTA's PTC surface temperature thermometer is small (2" diameter) and lightweight (2 ounces) and measures the temperature of the surface via bimetallic base.
Select options This product has multiple variants. The options may be chosen on the product page

SST Probe and Accessories

Price range: $40.00 through $855.00
Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or

Testex Press-O-Film Replica Tape – Legacy Roll

$42.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces. Coarse 0.8 to 2.5 / 20 to 64 X-Coarse 1.5 to 4.5 / 38 to 115 X-Coarse Plus 4.6 to 5.0 / 116 to 127 If you are looking for the new Testex cartons, click here.

Atkins 35200-K and Probes

Price range: $65.00 through $490.40
The Atkins hand-held thermocouple digital thermometer measures temperature from -100 to 999°F (-73 to 537°C) and stabilizes within 3 seconds of probe placement.

Certified Step Blocks

$435.00
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge.  These blocks have a certificate traceable to NIST.

Chlor*Rid DTS (Direct-To-Surface) Liquid Soluble Salt Remover

Original price was: $134.00.Current price is: $113.90.
Say goodbye to salt-related rework with Chlor*Rid DTS Liquid Soluble Salt Remover.
  • Pre-mixed solution with the same salt-removing capabilities as Chlor*Rid
  • Removes chlorides, nitrates, and sulfates from surfaces
  • 5-Gallon Pail.
  • Applied using a pressure washer
*If you order 4 or more, this product will ship via LTL Freight  

Chlor*Rid Liquid Soluble Salt Remover

Original price was: $384.00.Current price is: $310.00.
Say goodbye to salt-related rework with Chlor*Rid Liquid Soluble Salt Remover.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • 5-Gallon Pail.
  • Applied using a pressure washer
*If you order 4 or more, this product will ship via LTL Freight
   

Chlor*Rid SP8 Gel

Original price was: $380.00.Current price is: $323.00.
Say goodbye to salt-related rework with Chlor*Rid SP8 Gel.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • Removes flash rust
  • 5-Gallon Pail.
  • Applied using a pressure washer
*If you order 4 or more, this product will ship via LTL Freight  

Chlor*Rid SP8 Rinse

Original price was: $197.50.Current price is: $167.88.
Say goodbye to salt-related rework with Chlor*Rid SP8 Gel & Rinse.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • Prevents flash rust
  • 5-Gallon Pail.
  • Applied using a pressure washer
*If you order 4 or more, this product will ship via LTL Freight  

Chlor*Test CSN SCAT Kit

Price range: $240.00 through $1,680.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

CHLOR*TEST Surface Chloride ION Test Kit SCAT

$120.00
CHLOR*TEST Surface Chloride ION Test Kit (SCAT Kit)—5 PACK Kits are used to extract surface samples and analyze them for chlorides and other soluble salts.

Chlor*Test™ SCAT Kit

Price range: $120.00 through $1,075.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Wash Multipurpose Cleaner & Salt Remover

Original price was: $109.75.Current price is: $93.29.
A chemical blend that aids in the removal of road films, dirt, and chloride, sulfate, and nitrate salts.
  • Removes road films, dirt, and chloride, sulfate, and nitrate salts.
  • 5-Gallon Pail.
  • Applied using a pressure washer
*If you order 4 or more, this product will ship via LTL Freight  

Customizable Weld Inspection Kit

Price range: $56.50 through $667.00
Introducing our Customizable Weld Inspection Kit, tailored to meet your specific needs. With the freedom to select gauges and quantities, you determine which assortment is best for you.

Dakota ZX-3

$1,525.00
The Dakota ZX-3 is the replacement for the popular MX-3. Supplied by default is a 5 mHz transducer which allows it to read around 6” of wall thickness.

DeFelsko Certified Coating Thickness Standards

$385.00
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS S1 0, 3, 10, 60 mils S2 0, 3, 10, 40 mils
Select options This product has multiple variants. The options may be chosen on the product page

Fluke 62 MAX Infrared Thermometer Calibrated

$240.00
Fluke 62 MAX Infrared Thermometer measures temperature in transformers, motors, pumps, panels, breakers, compressors, duct, and much more! Please call our sales team if looking for a ISO calibrated model. 1-800-582-4243
Select options This product has multiple variants. The options may be chosen on the product page

Hold*Blast Surface Passivator

Original price was: $210.00.Current price is: $178.50.
Prevent flash rust with Hold*Blast Surface Passivator.
  • Prevents the formation of flash rust, by chemically changing the active surface of metal to a much less reactive state.
  • 5-Gallon Pail.
  • Applied using a pressure washer
*If you order 4 or more, this product will ship via LTL Freight

KTA 914 Non-Contact Infrared Thermometer

Price range: $49.99 through $99.99
The KTA Non-Contact Infrared Thermometer is engineered for accurate temperature measurement ensuring precision and efficiency in every evaluation. With its rapid and accurate infrared technology, this IR Thermometer provides instant surface temperature readings, aiding in meticulous inspections without contact. Its user-friendly design and reliable performance make it an indispensable asset for professionals seeking precision in coatings analysis, enabling swift and accurate assessments for superior quality control. The 12:1 distance to spot size makes gathering the average reading of an entire wall to a precise point an easy task.
Select options This product has multiple variants. The options may be chosen on the product page

KTA Abrasive Blasting Conductivity Kit

$249.00
KTA Abrasive Blasting Conductivity Test Kit – ASTM D4940 Compliant Ensure your abrasive media meets industry standards with the KTA

KTA Basic Inspection Kit

$1,495.00

The KTA Basic Inspection Kit includes a complete set of certified tools for coating inspections, including a PosiTector Standard Body, psychrometer, thermometers, and more.