- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Certified Step Blocks
$435.00
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge. These blocks have a certificate traceable to NIST.
In stock (can be backordered)
Description
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge. These blocks have a certificate traceable to NIST to go along with them. They are constructed from 1018 steel, so they maintain their accuracy overtime. The steps are 100, 200, 300, 400, and 500 mils with an accuracy of ±1 mil.
If a wall thickness gauge is needed to go along with the step blocks our full selection can be found here: https://ktagage.com/product-category/wall-thickness-gauges/.
Additional information
| Weight | .5 lbs |
|---|
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
