- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
KTA Bresle SCAT Kit 1
$5.00 – $615.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
SKU:
SCAT-Bresle IA
Categories: Best Sellers, Surface Contamination Test Kits
Description
KTA Bresle SCAT Kit 1
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts. All of the KTA SCAT Kits conform to SSPC Guide 15, and contain all of the equipment required to perform testing in the field. The KTA Bresle SCAT Kit 1Â contains a water demineralizer cartridge, 50 Bresle Patches (latex cells), two – 5cc syringes w/ needles, two plastic beakers, a bottle of Quantab chloride indicator strips, a bottle of EM Quant ferrous ion test strips, pH paper and easy to follow instructions. All equipment is contained in a handy plastic carrying case.
You may also like…
Chlor*Test CSN SCAT Kit
$240.00 – $1,680.00
Chlor*Test Water Kit
$105.00
Chlor*Testâ„¢ SCAT Kit
$120.00 – $1,075.00
Related products
Tinker & Rasor APW
$4,200.00
PosiTector Ultrasonic Wall Thickness Gauge
$805.00 – $2,365.00
Measure the wall thickness of pipe and other steel structures from one side using the DeFelsko UTG ultrasonic wall thickness gauge.
Select optionsEarn up to 118 points.
This product has multiple variants. The options may be chosen on the product page
Testex Press-O-Film Replica Tape – Legacy Roll
$42.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
KTA Abrasive Blasting Conductivity Kit
$475.00
KTA Bresle Kit – 3
$365.00
KTA Pipeline Inspection Kit
$2,700.00
PTC Durometers
$750.00 – $999.95
Measure the indention/penetration hardness of plastics, rubber and thick film coatings in the laboratory, shop or field according to ASTM D2240 using the PTC Durometer Hardness Tester.
Select optionsEarn up to 50 points.
This product has multiple variants. The options may be chosen on the product page
Surface Chloride ION Test Kit – 50 Pack
$1,075.00