- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Commercial Painting Inspection Kit
$2,345.00
Not sure what combination of inspection instruments you need? KTA has done the work for you with it’s complete Basic Inspection Instrument Kit.
Available on backorder
Description
The KTA Commercial Painting Inspection Kit contains all the instruments and gauges necessary to perform big-box store inspections. All instruments/gauges are contained in a durable case.
Substrate Moisture Content
- Delmhorst BD-10 Moisture Meter (conductivity principal)
- Aquant Protometer Moisture Meter (radio frequency principal)
Ambient Conditions and Surface Temperature (Select Option 1 or Option 2)
- PosiTector® DPM Digital Psychrometer (includes thermocouple for surface temperature)
- KTA 914 Non-contact Infrared Pyrometer (surface temperature)
Paint Temperature
- Taylor Paint Thermometer
Wet and Dry Paint Thickness
- KTA Stainless Steel 4-in-1 Wet Film Gauge
- PosiTector® 6000 Dry Film Thickness Gauge with F/NF Probe
Additional information
| Weight | 16.5000 lbs |
|---|
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
