The Positector 6000 DPMA probe is the perfect solution for gathering ambient conditions in the field. Along with all of
Available in either standard or advanced models with built in or separate probe, this electronic psychrometer measures and records ambient conditions including air and surface temperatures, relative humidity, dew point temperature and the spread between the dew point and surface temperatures.
Positector IRT The Positector IRT probe offers an affordable way to add the infrared capability to a Positector 6000 body.
This remarkable digital spring micrometer measures and records average peak to valley surface profile height with improved accuracy us Testex Press-O-Film Replica Tape. It also provides inspectors with a digital record of measurements that can be downloaded to your computer.
The PosiTector SHD Shore Hardnesss Durometer is a handheld electronic instrument that measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges - Shore A and Shore D.
The PosiTector SPG Surface Profile Gauge measures and records peak to valley surface profile heights.
Positector 6000 and Probes. Choose either the Standard Memory Body or the Advanced Memory Body and then add your probes!
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more. B-Probe for coatings over wood, composites. 0-40 mils. C-Probe for coatings over concrete, fiberglass. 2-150 mils. D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.
Choose either the Standard Memory Body or the Advanced Memory Body and then add your probes!
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
This compact, lightweight, precisely balanced coating thickness gauge nondestructively measures the thickness of nonmagnetic coatings applied to ferrous substrates.
The PosiTest DFT nondestructively measures the total thickness of coatings applied to ferrous (F model) or ferrous/Non-ferrous (F/NF model) metal substrates.
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS S1 0, 3, 10, 60 mils S2 0, 3, 10, 40 mils
These convenient, pre-packaged, color-coded plastic shim sets are used to verify the accuracy of electronic dry film thickness gauges.
Positector 6000 DPMA Probe The Positector 6000 DPMA probe is the perfect solution for gathering ambient conditions in the field.
Equipped with the smallest probe of any magnetic pull-off gauge, the PosiPen is a miniature (5.5" long) gauge that measures the thickness of any non-magnetic coating applied to a ferrous substrate.
Positector IRT Probe The Positector IRT probe offers an affordable way to add the infrared capability to a Positector 6000
These small pocket-sized aluminum gauges are uniquely designed to measure the thickness of powder coatings after application but before they are cured.
Positector SmartLink Coating Thickness Gauge The PosiTector SmartLink and free mobile app. Turn your cell phone or tablet into a
FRS Cabled Right Angle Probe 0-60 mils Ferrous Substrate