PosiTest® HHD High Voltage Holiday Detector
PosiTector DPM
PosiTector DPM L
PosiTector DPMA
PosiTector DPMIR
PosiTector DPMS
PosiTector IRT
PosiTector RTR Replica Tape Reader
PosiTector SHD Shore Hardness Durometer
PosiTector SPG Surface Profile Gauge
DeFelsko PosiTector 6000 and Probes
PosiTector 200 Ultrasonic Coating Thickness Gauge
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more.
B-Probe for coatings over wood, composites. 0-40 mils.
C-Probe for coatings over concrete, fiberglass. 2-150 mils.
D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.
PosiTector BHI
PosiTector CMM IS
PosiTector SPGTS
PosiTector SPGTS Probe
PosiTest AT Group Item
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT (adhesion tester) uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
PosiTest Coating Thickness Gauge
PosiTest® DFT
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
DeFelsko Plastic Shims
DPMA Probe for Wind and Environmental Readings
PosiPen
PosiTector DPMIR Probe
Positector IRT Probe
PosiTest OTL Logger Only
PosiTest® CMM
Concrete Moisture Meter non-destructively measures the moisture content of concrete in accordance with ASTM F2659
The PosiTest CMM Concrete Moisture Meter is the fast, non-destructive impedance meter ideal for inspectors looking to quickly evaluate the moisture condition in concrete slabs.
Conforms to ASTMÂ F2659
PosiTest® OTL (Oven Temperature Logger) Kits & Probes
- Precisely records temperature profiles
- Stores up to 40,000 datasets in 6 independent batches
- High-temperature stainless steel box with insulation
- 6 K-type thermocouple ports
- Includes the NEW Cure Index feature
- Easy data management with PosiSoft Desktop Software
- Wide probe variety available (6', 12', 20') (sold separately)
PosiTest® OTL Kit
- Precisely records temperature profiles
- Stores up to 40,000 datasets in 6 independent batches
- High-temperature stainless steel box with insulation
- 6 K-type thermocouple ports
- Includes the NEW Cure Index feature
- Easy data management with PosiSoft Desktop Software
- Wide probe variety available (6', 12', 20')
PosiTest® OTL XT Kit
Features enhanced holder with heatsink for greater endurance at high temperatures.
- Precisely records temperature profiles
- Stores up to 40,000 datasets in 6 independent batches
- High-temperature stainless steel box with insulation
- 6 K-type thermocouple ports
- Includes the NEW Cure Index feature
- Easy data management with PosiSoft Desktop Software
- Wide probe variety available (6', 12', 20')
Powder Comb Thickness Gauge
PosiTest® PC Powder Checker
Non-contact Uncured Powder Thickness Gage
Using non-contact ultrasonic technology, the PosiTest PC measures uncured powder coatings to predict a cured thickness.
- Dedicated stand-alone unit is ready to measure right out of the box
- Up to 4x faster measurement speed*—ideal for moving lines and swinging parts
- No calibration adjustment required for most powders
- Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop Software
- Scan Mode continuously takes measurements—ideal for analyzing large areas
Conforms to ASTM D7378