A K-Type thermometer with a ceramic tip allowing for use in high temperature applications. Measurement range is from -40° to 1,202° F.
PosiTest® HHD High Voltage Holiday Detector
PosiTest® LPD Holiday Detector
Tinker & Rasor PRM
Tinker-Rasor Low Voltage Wet Sponge Holiday-Pinhole Detector
PosiTector DPM
PosiTector DPM L
PosiTector DPMA
PosiTector DPMIR
PosiTector DPMS
PosiTector IRT
PosiTector RTR Replica Tape Reader
PosiTector SHD Shore Hardness Durometer
PosiTector SPG Surface Profile Gauge
Testex Analog Spring Micrometer
Tinker & Rasor APW
DeFelsko PosiTector 6000 and Probes
Paint Temperature Thermometer
PosiTector 200 Ultrasonic Coating Thickness Gauge
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more.
B-Probe for coatings over wood, composites. 0-40 mils.
C-Probe for coatings over concrete, fiberglass. 2-150 mils.
D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.
PosiTector BHI
PosiTector CMM IS
PosiTector SPGTS
PosiTector SPGTS Probe
PosiTector Ultrasonic Wall Thickness Gauge
PosiTest AIR Leak Tester
PosiTest AT Group Item
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT (adhesion tester) uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
PosiTest Coating Thickness Gauge
PosiTest® DFT
PTC Surface Temperature Thermometer
SST Probe and Accessories
Testex Linearizing Spring Micrometer
Testex Press-O-Film Replica Tape
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
Tinker & Rasor AC-15 AC Warning System
Tinker & Rasor Copper-Copper/Sulfate (CSE) Half Cell Reference Electrodes
Tinker & Rasor Silver-Silver/Chloride (AgAg/Cl) Reference Electrode Kit
Tinker & Rasor SR-2 Soil Resistivity Meter
Tinker & Rasor RF-IT Above Ground Insulator Tester
Tinker-Rasor CP Test Stations
Tinker-Rasor Soil Boxes
007 Compact Wet Blasting Unit
Don't be fooled by its compact size; the small GBT 007 packs a punch that surpasses industry standards. The team at Greener Blast embarked on a mission to redefine what's possible with a miniature unit, and the result is nothing short of extraordinary. With the GBT 007 Compact Wet Blasting Unit, expect performance, reliability, and aesthetics that exceed your expectations.
12 Piece Fillet Weld Set
Adjustable Fillet Weld Gauge
Amine Blush Test Kit
Atkins 35200-K
Atkins 35200-K and Probes
Atkins 49126-K
Atkins 50335-K
Bacharach Replacement Bulb – 25 to 120 °F
Bacharach Replacement Wicks (4 Pack)
Bacharach Sling Psychrometer
DISCONTINUED BY MANUFACTURER
See ktagage.com/product/sling-psychrometer for alternative
Blotter Paper
C-2
Carson MicroBrite Illuminated Inspection Microscope
Cath-Tech CTL-3000 Analogue DCVG
Cath-Tech Hexcorder Pro
Certified Clemtex Hypodermic Needle Pressure Gauge
Clemtex Hypodermic Needle Pressure Gauge
Included with the purchase of this Certified Clemtex Hypodermic Needle Pressure Gauge is a 3 point calibration certificate done by KTA's service department. If this is not needed a non-certified version can be found by Clicking Here. Maximize your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Proper use of this gauge will measure pressure drops that are responsible for decreased production rates, increased abrasive consumption and improper anchor profile in abrasive blasting systems. Accuracy: ±5% Made in the USA.Certified Step Blocks
Chlor*Rid DTS (Direct-To-Surface) Liquid Soluble Salt Remover
Say goodbye to salt-related rework with Chlor*Rid DTS Liquid Soluble Salt Remover.
- Pre-mixed solution with the same salt-removing capabilities as Chlor*Rid
- Removes chlorides, nitrates, and sulfates from surfaces
- 5-Gallon Pail.
- Applied using a pressure washer
Chlor*Rid Liquid Soluble Salt Remover
Chlor*Rid SP8 Gel
Chlor*Rid SP8 Rinse
Chlor*Test Abrasive Kit
Chlor*Test CSN Refill Kit
Chlor*Test CSN SCAT Kit
Chlor*Test Water Kit
Chlor*Test™ SCAT Kit
Chlor*Wash Multipurpose Cleaner & Salt Remover
Chloride Quantab Test Strips
Clemtex Hypodermic Needle Pressure Gauge
Clemtex hypodermic needle pressure gauge maximizes your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Made in the USA.
Coarse 0.8 to 2.5 mils (20 to 64 microns)
Combo-Welding Gauge
Can measure in Inch or Metric
- Measure root size: Accurately determine the root size of your welds, crucial for maintaining structural integrity.
- Fillet weld leg measurement: Easily assess fillet weld leg dimensions, ensuring compliance with specifications.
- Butt weld height: Measure butt weld height with precision, vital for achieving desired weld profiles.
- Fillet weld throat: Determine fillet weld throat dimensions accurately for optimal weld strength.
- Angle of preparation: Gauge the angle of preparation effortlessly, facilitating precise welding setups.
Corporate Worker Lead Protection Program
Prepared to address the requirements of the OSHA Construction Industry Lead Standard, the KTA Corporate Worker Lead Protection Program includes a Medical Surveillance Program and a Respiratory Protection Program for lead exposure projects
$500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderCorporate Worker Safety & Health Program for Facilities Maintenance
KTA’s experience with the petrochemical and gas industries indicates that painting contractors need a corporate worker safety and health program that not only complies with 29 CFR 1926, but also selected regulations in 29 CFR 1910 (OSHA General Industry Standards).
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderCorporate Worker Safety & Health Program for Industrial Painting Projects
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderCorporate Worker Safety and Health Program for Construction Painting Projects
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
Corrosion and Coatings
Customizable Weld Inspection Kit
Dakota V-Block Housing
DE Stearns 14/20 High Voltage Holiday Detector
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
DeFelsko Plastic Shims
Delmhorst Moisture Meters
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
Dickson Temperature/HumidityRecorder 24-Hour Charts 415
Dickson Temperature/HumidityRecorder 7-Day Charts 417
Dickson TH8P3
DPMA Probe for Wind and Environmental Readings
DPMD Probe for Internal Tank and Pipe Measurements
E2TM (includes magnetic pick-up)
Economy Single Purpose Hi-Lo Welding Gage
Fluke 117 Multimeter
Fluke 375 FC True-RMS AC/DC Clamp Meter
Fluke 561 Infrared Thermometer
Fluke 62 MAX Infrared Thermometer Calibrated
Fluke 971
GBT 175 Vapor Blasting Unit
Introducing the GBT 175 Vapor Blaster by Greener Blast Technologies: Power, Precision, and Performance
Unleash the full potential of your surface preparation tasks with the GBT 175. This industry-favorite model delivers wet blasting power, durability, and affordability. Versatile enough to handle heavy-duty jobs or intricate detailing with ease.
GBT 760 Slurry Blasting Unit
Introducing the GBT 760 Slurry Blasting Unit: Power, Precision, and Portability
Greener Blast's compact powerhouse, the GBT 760, redefines surface preparation. Built for major blasting jobs yet versatile enough for delicate tasks, this patented feat of engineering boasts unmatched power, reliability, and affordability.
GBT Dual Outlet Wet Blaster
Hach Demineralizer
Hi-Lo Welding Gauge
Hold*Blast Surface Passivator
HTK-2LT LED Inspection Mirror
HTS-2LT Illuminated Inspection Mirror
Hypodermic Needle Pressure Gauge
Illuminated Magnifier-10X
Illuminated Magnifier-5X
Inspection Mirrors
Intrinsically Safe Night Stick Polymer Dual Light
ISO Surface Cleanliness Standards
K-2
Keane-Tator Illumintated Magnifier 372
Keane-Tator Surface Profile Comparator
Keane-Tator Surface Profile Comparator 372/3
Keane-Tator Surface Profile Grit/Slag Comparator Disc 372/G
Keane-Tator Surface Profile Sand Comparator Disc 372/S
Keane-Tator Surface Profile Shot Comparator Disc 372/SH
Kestrel Drop
KTA 2mm Cross Cut Guide
KTA 914 Non-Contact Infrared Thermometer
The KTA Non-Contact Infrared Thermometer is engineered for accurate temperature measurement ensuring precision and efficiency in every evaluation. With its rapid and accurate infrared technology, this IR Thermometer provides instant surface temperature readings, aiding in meticulous inspections without contact. Its user-friendly design and reliable performance make it an indispensable asset for professionals seeking precision in coatings analysis, enabling swift and accurate assessments for superior quality control. The 12:1 distance to spot size makes gathering the average reading of an entire wall to a precise point an easy task.
KTA Abrasive Blasting Conductivity Kit
KTA Advanced Inspection KIT
KTA Aluminum Wet Film Thickness Gauge (25 Pack)
KTA Basic Certified Inspection Kit
KTA Bresle Kit – 3
KTA Bresle SCAT Kit 1
KTA Certified Basic Inspection Instrument Kit
KTA Cross Cut Guide Adhesion Test Kit
KTA Cross Cut Guide Kit CCG-2MM
KTA Pipeline Inspection Kit
KTA POG (Pressure Orifice Gage)
KTA Swab SCAT Kit
KTA Test Panels – Call To Order
KTA-Tator, Inc. fabricates a variety of test panel sizes. Commercial grade hot-rolled carbon steel panels are available with mill scale or abrasive blast cleaned. Please "Contact Us" to inquire about our line of steel test panels. Our staff will be happy to explain all of the sizes and finishing options that are available, and to provide you with pricing, including shipping options and charges. Fabricated in the USA. Call To Order
KTA X-Cut Guide Kit
KTA-Bresle SCAT Kit I
KTA-Bresle SCAT Kit II
KTA-Chlor*Test CSN SCAT Kit
KTA-Swab SCAT Kit
KTA-Tator Certified Stainless Steel Wet Film Thickness Gauge
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. A copy of the NACE standard is included with your purchase. Made in the USA.
NIST Calibration Standards
Octagon Wet Film Thickness Gauge
Paint Adhesion Test Kit
Paint Adhesion Test Kit (Blade Sold Separate)
Pelican 1400 Carrying Case (Black)
Pelican 1400 Carrying Case (Yellow)
Pelican 1500 Protector Case
Pelican 1525 Air Case
Pelican 1557 Air Case
Discover the cutting-edge Pelican 1557 Air cases, a pinnacle of innovation from the protective case pioneers. Up to 40% lighter, waterproof, crushproof, and dustproof, these cases feature Press and Pull™ Latches, user-customizable Pick N Pluck™ foam, a fold-down over-molded handle, and a waterproof O-ring seal
Pelican 1620 Protector Case
Pelican 3345 Dual Flashlight
Pelican 7100 LED Flashlight
Pelican 7600 Flashlight
Pelican 9410L Floodlight
pH Colorfast Strips
Pipe Pit Gauge
The Pipe Pit Gauge fits neatly into the leather case and can be easily carried in one's pocket. It will serve as a constant guide for judging the condition of the pipe. Useful formulas, tables, and data giving O.D., wall thickness, and weight per foot for various pipes are etched on the gauge. It should be in the hands of every field superintendent, engineer, or foreman working with pipe.
PosiPen
PosiTector DPMIR Probe
PosiTector Inspection Kit
Positector IRT Probe
Positector Kit F1
PosiTector Probe Extender
PosiTector RTR 3D Replica Tape Reader Bundle
PosiTector SHD Probe
Positest Air Leak Tester
PosiTest AT 50 mm C1583 Conversion Kit
Positest AT 50 MM Kit (to use concrete dollies)
PosiTest AT 50 mm x 50 mm Tile Conversion Kit
PosiTest AT-Automatic Kit
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
PosiTest AT-Manual Kit
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
Positest LPD Holiday Detector Basic Kit
PosiTest OTL Logger Only
PosiTest® CMM
Concrete Moisture Meter non-destructively measures the moisture content of concrete in accordance with ASTM F2659
The PosiTest CMM Concrete Moisture Meter is the fast, non-destructive impedance meter ideal for inspectors looking to quickly evaluate the moisture condition in concrete slabs.
Conforms to ASTM F2659
PosiTest® OTL (Oven Temperature Logger) Kits & Probes
- Precisely records temperature profiles
- Stores up to 40,000 datasets in 6 independent batches
- High-temperature stainless steel box with insulation
- 6 K-type thermocouple ports
- Includes the NEW Cure Index feature
- Easy data management with PosiSoft Desktop Software
- Wide probe variety available (6', 12', 20') (sold separately)
PosiTest® OTL Kit
- Precisely records temperature profiles
- Stores up to 40,000 datasets in 6 independent batches
- High-temperature stainless steel box with insulation
- 6 K-type thermocouple ports
- Includes the NEW Cure Index feature
- Easy data management with PosiSoft Desktop Software
- Wide probe variety available (6', 12', 20')
PosiTest® OTL XT Kit
Features enhanced holder with heatsink for greater endurance at high temperatures.
- Precisely records temperature profiles
- Stores up to 40,000 datasets in 6 independent batches
- High-temperature stainless steel box with insulation
- 6 K-type thermocouple ports
- Includes the NEW Cure Index feature
- Easy data management with PosiSoft Desktop Software
- Wide probe variety available (6', 12', 20')
Powder Comb Thickness Gauge
Protimeter Aquant Nondestructive Moisture Meter
Psychro-Dyne Psychrometer
PTC Durometers
Qnix 1500
QNix 5500
QNix 9500
QP-1 Coatings Quality Control Program
Prepared specifically for industrial painting contractors, this written quality control program has been completely updated to conform to the management, technical and quality control requirements of the AMPP-QP1 Contractor Certification Program.
$1,500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderQP-2 Deleading Compliance Program
Prepared under the direction of a Certified Industrial Hygienist, the KTA Corporate Deleading Compliance Program addresses the protection of workers, management of releases of lead to air, soils and waters, and management of waste streams. The program provides policies and guidance in each of these three general areas, and is based upon existing Federal regulations.
$1,500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderQP-3 Quality Control Program
Developed by an SSPC certified Protective Coatings Specialist, this Quality Control Program addresses the latest requirements of SSPC: The Society for Protective Coatings QP-3 certification program.
$2,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderQP-3 Worker Safety and Health Program
This Corporate Worker Safety and Health Program conforms to the criteria of SSPC: The Society for Protective Coatings Qualification Procedure No. 3 (QP 3) Standard Procedure for Evaluating Qualifications of Shop Painting Applicators. The program is designed to be used in conjunction with a current copy of 29 CFR 1910 (not included).
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderQP-6 Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures Quality Control Manual
KTA has developed a Quality Control Manual for metallizing, written by an SSPC Certified Protective Coating Specialist with over 35 years of experience in the coatings industry, that meets the requirements of the most recent version of the QP-6 certification standard.
Contact Lisa Bowermister (lbowermeister@kta.com/412-746-4247) to Order
QS 1, Standard Procedure for Evaluating a Contractor’s Advanced Quality Management System
$2,000
Contact Lisa Bowermister (lbowermeister@kta.com /412-746-4247) to OrderReplacement 20mm Pull Stubs
Replacement Cross Cut Knife Blades (10 Pack)
Replacement Needle
Rilem Tube
Rilem Tubes
S-2
Skew-T Fillet Weld Gauge
Sling Psychrometer
Spectroline Opti-Lux 365 OLX-365B Blacklight
With a lightweight and compact body, the OPTI-LUX 365B greatly reduces user fatigue. It gets into tight, cramped places that larger lamps can’t. The flashlight has a coverage area of up to 2.5 inches (6.4 cm) in diameter at a distance of 15 inches (38.1 cm). This versatile unit produces an extremely uniform beam profile for both sample viewing and photography.
Powered by one rechargeable lithium-ion battery (extra battery included in kit), the OPTI-LUX 365 provides four hours of continuous inspection time. The rugged, anodized aluminum lamp body minimizes corrosion and stands up to years of heavy use.
This UV-A LED inspection flashlight comes complete with a lanyard, belt holster, two rechargeable batteries, smart 2-position charging cradle with AC and DC power cords, and UV-absorbing spectacles, all conveniently packaged in a padded carrying case
Spectroline Vintage 365
SSPC Pocket Guide to Coating Information
This handy pocket guide is packed with information and formulas commonly referenced during coatings work, including information on corrosion, surface preparation, soluble salt detection, coating application, International Marine Regulations, concrete standards and inspection. This Guide is a "must have" for anyone involved with industrial coatings.
SSPC Surface Preparation Specifications and Practices
SSPC Vis Guides
Stainless Steel Burnishing Tool
Steel Test Panels
Surface Coatings for protection against wear
Testex Optical Replica Tape – For use with RTR3D
Testex X-Coarse Plus 4.6 to 5 mils (116 to 127 microns)
The Concrete Profiler
The Paint Inspectors Field Guide
For protective coating inspection. An Inspection aid and guide produced for the inspector, by an inspector.
This field guide was developed to offer guidance, experience and assistance to protective coating inspectors, specifiers, owners, and painting contractors.
The book is complemented by a wide range of inspection and experience notes, with additional photos of coatings issues.
Tooke Gauge
TQC Dust Tape Kit
Ultrasonic Couplant
US Weather Bureau Psychrometric Tables (WB-235)
Using Coatings Inspection Instruments 3rd Edition
Completely updated, the 3rd edition includes instructions on the step-by-step use of 50 instruments and test kits for measuring ambient conditions (including electronic psychrometers), surface profile (including two digital depth micrometers and a new procedure for use of replica tape), SSPC visual guides, wet and dry film thickness, concrete testing, destructive coating thickness measurement, adhesion, holiday/pinhole detection and coating hardness. An updated list of surface cleanliness standards, an updated index of industry standards, and a new surface salt extraction and analysis procedure are also included.
Vaprecision Calcium Chloride Vapor Emission Test Kit
Viscosity Cups
Wall Mount Hygrometer/Thermometer
Wolf Wilburn Pencil Hardness Tester
X-Coarse 1.5 to 4.5 mils (38 to 115 microns)
Ames Dial Micrometer
Barcol Impressor Hardness Tester
Byko Test
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
Kestrel 1000 Pocket Wind Meter
Kestrel 2500 Pocket Weather Meter
Kestrel 3000 Pocket Weather Meter
Kestrel 5000 Environmental Meter
Kestrel 5000 Environmental Meter with LiNK
Kestrel 5500 Rugged Weather Meter
Kestrel 5500 Rugged Weather Meter with LiNK
KTA X-Cut Guide Package
PosiTest® PC Powder Checker
Non-contact Uncured Powder Thickness Gage
Using non-contact ultrasonic technology, the PosiTest PC measures uncured powder coatings to predict a cured thickness.
- Dedicated stand-alone unit is ready to measure right out of the box
- Up to 4x faster measurement speed*—ideal for moving lines and swinging parts
- No calibration adjustment required for most powders
- Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop Software
- Scan Mode continuously takes measurements—ideal for analyzing large areas
Conforms to ASTM D7378